A power quality monitor doesn’t measure power quality. Instead, it measures voltage and current, thousands of times per second, and every other number it ever shows you—RMS, kVAR, THD, Pst,…
Flex CT White Papers
Power quality white papers on Flex CT.
19 white papers in Flex CT
Circuit and CT Hookup Detection with the Seeker+
Setting up a power quality recorder has always meant double-checking the circuit type and every current transformer (CT), the clamp that measures current. A CT on the wrong phase or…
Working with Live Data in PMI View
PMI View’s live data pages show waveforms, phasors, and tabular values from a connected device, updating as you watch, without interrupting an active recording. During initialization, the live data pages…
Using PMI’s TLAR and TLAR-S Clamp-Style Current Transformers
Clamp-Style Current Transformers (CTs) are a convenient and safe way to measure current flowing through a conductor. PMI offers the TLAR line of iron core CT clamps in both the…
Auto-Correction of CT Hookup
Sometimes when hooking up CTs for a device, a user will inadvertently place the CTs in the wrong configuration. Maybe the channel 2 CT was placed on the third phase…
Measuring Current: Best Practices
PMI supports two types of current probes for measurements: Rogowski coil and iron-core clamps. Their distinct properties and characteristics need to be considered in a particular situation to better the…
Using Current Clamps
Measuring the current of residential, commercial or industrial applications is vital to get a complete power quality picture. This white paper covers various topics to effectively utilize the different types…
Disconnecting a Power Quality Recorder
This whitepaper covers the proper method used to disconnect power quality recorders and remove them safely from their location. Following the proper disconnection sequence eliminates or minimizes generating and recording…
Using the Revolution Mounting Bracket
The PMI mounting bracket provides a variety of methods to temporarily or permanently attach a Revolution or 3-phase Boomerang to a metal enclosure, mounting plate, or many other points. Internal…
Getting Started with the Pole Mount Boomerang
This white paper will explain the process of installing and communicating with a Pole mount Boomerang voltage/current/power sensor (Figure 1). The pole mount option includes a rugged, weatherproof NEMA 4X…
Using TLAR CTs
TLARs are PMI's iron core CT (Current Transformer) clamps, available in various probe and channel configurations. These clamps are used for lower range current measurements, with ranges of 20A or…
Using Scale Factors for PT/CT Ratios & Per-Unit Analysis in ProVision
Raw voltage, current, and power signals applied to a PQ recorder are often scaled versions of the true data under question. Transducers such as PTs and CTs step the voltage…