Overview

Just like the rest of the Eagle Series, the Eagle 200 Kit has both USB and Bluetooth® communications, 8MB memory, and is compact enough to fit into the smallest enclosures. The Eagle 200 Kit is specifically configured to measure up to 300V and 1000A, precisely the range needed for larger homes with 400A services. The 200 Meter Kit allows hookup without service interruption.

The Eagle 200 Kit Includes:

• Eagle 200 two channel power quality analyzer
• FCT 2/12 (set of two twelve inch Flex CTs)
• Soft-sided nylon carrying case

Specs

Inputs

AC Voltage: 0 to 300 VAC
AC Current: 0 to 1,000 Amps with CT probes
Sample Rate: 15,360 samples per second/channel; 256 samples per cycle

Channels

Voltage: 2 channels
Current: 2 channels

Measured Quantities Per Cycle

RMS Voltage: Volts
RMS Current: Amps
Real Power: Watts
Apparent Power: VAs
Reactive Power: VARs
Phase Angle: Degrees
Power Factor: Watts/VA
Displacement PF: cos (phase angle)
Power Usage: kWh, kVARh, kVAh

Accuracy

Voltage: ±0.33% of full scale
Current: ±1.0% of full scale w/o probe
Power: ±1.0% of full scale w/o probe
Phase Angle: ±1.0° w/o probe
Power Factor: ±0.02 w/o probe
Displacement PF: ±0.02 w/o probe

Safety

Pollution Degree 2: 600V CAT III
UL Listed: UL/IEC 61010

Harmonics

Voltage: to the 51st
Current: to the 51st
Measures: magnitude, phase, THD

Communications

Bluetooth® Wireless, USB

Information Storage

Interval Graph: 6.9 MB
Significant Change: 1000 records
Flicker: 1000 records
Waveform Capture: 3.75 MB

Record Settings

Interval Graphs: 1 cycle to 4 hour interval. User selected, stop-when-full, or wrap around memory modes
Significant Change: 1V to 8V in 1V steps
Flicker: User-defined, or conform to IEEE 1453/IEC 61000-4-15, and IEEE Std. 141
Waveform Capture: Voltage and current threshold, periodic capture

Power Supply Requirements: Environmental

Voltage: 60-600VAC Channel 1 to Common (47-63Hz)
Power Consumption: 1.5 Watts max, 9VA max at 600VAC
Operating Temp: -22°F to +131°F
Humidity: Less than or equal to 85%
Shock: 60 Hz to 2 kHz, acceleration 25G
Vibration: 10 Hz to 60 Hz, amplitude 1.8mm
Max Altitude: 2.0 km (6560 ft), derated above 2.0 km

Physical Dimensions

Size: 4.375”L x 3.375”W x 1.812”H
Weight: less than 1 lb
Case: NEMA 4X

Power Fail Operation

Specifications: These recorders can operate without any input voltage for up to 2 hours. This allows it to record down to 0 volts on all channels during power outages.

Downloads

Firmware

• Latest WinScan Firmware
• Latest Provision Firmware

Documents

• Eagle and Revolution® Hookup Diagram

Specification Sheet

• Eagle Series Spec Sheet